DV 10 SB Fluid head (1006)

:::현재위치 HOME ▶ Sachtler ▶ Camera Support ▶ Fluid Head ▶ 100mm ▶ DV 10 SB Fluid head (1006)

DV 10 SB Fluid head (1006)

▷ 간단한 설명


	The new DV 10 SB fluid head is Sachtler’s smallest 100mm solution. It provides a 12-step counterbalance as well as five horizontal and five vertical grades of drag (+0). The Speedbalance technology enables fast and smooth adjustments, while the head’s payload range from 1 to 12 kg (2-26 lbs) and tilt range of +90° to -75° make the DV 10 SB the ideal tool for diverse shooting conditions. The fluid head is equipped with a compartment for spare camera screws (pin, 1/4”, 3/8”), sparing the operator from tedious searching on the set. The DV 10 SB operates with a DV 100 pan bar. Other useful features include the integrated flat base fitting and a self-illuminating Touch Bubble. The fluid head DV 10 SB is delivered with the Touch & Go® plate 16 (Code No. 1064). It comes with a 1/4” screw and 3/8” screw. Spare camera screws (1/4”/ 3/8”) and a pin screw are stored in the balance plate. The pin screw fits in the center hole of the camera plate. Thus a pin/1/4” screw connection can be achieved if your camera requires this connection. If your camera remains front- or back heavy after going through the necessary centring procedure you may solve this by using the C.O.G plate (Code No. 1063). This plate offers a removed position.The C.O.G. plate can be mounted to either the front or the back. It cannot be operated with pin and 1/4” screw

Technical data

Weight	2.6 kg / 5.7 lbs
Payload	1 - 12 kg / 2.2 - 26.5 lbs
Sliding range - plate	60 mm / 2.4 in
Counterbalance	in 12 steps
Grades of drag	5 each horizontal and vertical + 0
Tilt range	+90/-75°
Temperature range	-40/+60° C
Camera fitting	Touch & Go Plate S
Tripod/Pedestal fitting	100 mm bowl, integrated flat base fitting
Pan bar(s)	1, Type DV 100
Level	self-illuminating Touch Bubble
Batteries Level	1 x CR2032

Payload

C.O.G.* (mm)	min. kg	max. kg
75	1,7	15,8
100	1,4	13,4
125	1,3	11,6
150	1,1	10,3
175	1,0	9,2
200	0,9	8,3