Bradley
SYSTEM
Blackcam
Miller
System
Fluid Head
Tripod
Spreader + Feet
Dolly
Case
Pedestal
Jib System
Accessories
Sachtler
Camera Support
Accessories
Telemetrics
PTZ Camera Control Systems
Coax/ Fiber Camera Adapters
Camera Robotics
ADC
Vocas
Bebob
:::현재위치 HOME
▶
Telemetrics
▶
Camera Robotics
▶
Pan & Tilt Heads
▶ Camera/Teleprompter Pan/Tilt Head(PT-LP-S4)
Camera/Teleprompter Pan/Tilt Head(PT-LP-S4)
▷ 간단한 설명
The Telemetrics PT-LP-S4 is a precision pan/tilt head with smooth variable operating speed. Heavy duty bearings and motors with isolation mounts provide smooth and quiet operation. Manual smooth motion is accomplished using digital servo controls. The unit is controlled through serial data using RS-232, RS-422 or Ethernet. Two hundred and fifty-five presets are available, memorizing pan, tilt, zoom ,focus, track/televator, dolly, iris and master pedestal . An optional camera control feature is available for certain cameras. Tally connector is provided to interface with optional Tally box (PT-LP-S4-TL) and deliver video and power to a teleprompter . Extender/CC connector provides lens extender and contact closure interface. Optional video and power for a confidence monitor are provided through the same connector. The internal cable management system provides cable connections at the base of the pan/tilt to ease cable installation and operation.
The PT-LP-S4 receives power from the PS-RM-48V Rack Mount Power Supply. A powerful DC-DC converter at the base of the Pan/Tilt head converts 48V to appropriate voltage levels for the head, auxiliary robotics devices, camera, lens, viewfinder, teleprompter and confidence monitor.
Pan Travel (Max):
340° w/endstops (360° without end-stops)
Tilt Travel (Max):
±170° (+15 °, -10° with teleprompter)
End Stop Resolution:
Mechanical
: Continuous Angular Adjustment - Abrupt Stop;
Electronic
: Smooth Stop
Velocity (Min/Max)
Pan:
0.01° -25°/sec; Tilt 0.01° -25°/sec
Pan:
0.01° - 55°/sec; Tilt 0.01° -55°/sec (PTO-LP-S4-HS) *
Stopping Accuracy:
± 3 arc minutes/0.05°
Acceleration:
60º/sec.² (PTO-LP-S4-HS) *
*Velocity and acceleration are load dependant.
Audible Noise:
37 dB(A) max, IEC free field
Operating Modes:
32 Bit Velocity and Positional Servo Control Preset Position with Multi-axis convergence
Dynamic Load:
67 lbs. (30 kg) load on center of mass
Weight:
31 lbs. (14 kg)
Input Voltage:
38-53 VDC
Max Input Current:
6.8 A max
Input Power Connector:
7-pin Male XLR
Camera Power:
40 W (13.5 VDC, 3 A max)
Teleprompter Power (opt.):
80 W (13.5 VDC, 6 A max)
Conf. Monitor Power (opt.):
40 W (13.5 VDC, 3 A max)
